Sharkskin Face Masks New In Stock
Simple, Stylish, Environmentally friendly
The bridge of the nose is a point of leakage that affects many masks. We have inserted a mouldable, comfortable nose bridge to ensure a better fit and minimise leakage. Just squeeze gently and push onto the nose and against the face to mould the mask to your face.
Over the head straps
We have tested many designs including around the ears. In our experience over the head designs are more comfortable. Our staff working in the mask construction area are required to wear masks during manufacture and are wearing them for a large part of the day.
Flexible & adjustable elastic
We use a thicker high quality elastic which is flexible and provides a comfortable fit. The elastic features an adjustable strap to accommodate various face sizes.
We have tested the hydrophobic masks for 30 Industrial Wash Cycles at over 60 degrees and 30 drying cycles. Masks still repelled water and had no apparent degradation of water repellent properties. We would recommend replacing the mask on approximately 30 washes depending on condition. Water droplets should bead on the outer surface.
Fit & comfort
If you observe people wearing masks in public, you will notice there are often gaps down the side of the nose, under the chin or sides. A well fitted mask is essential in providing protection. We have used years of tailoring expertise and chosen flexible materials to ensure a comfortable and well fitted mask.
At Envirus, you receive the service only a local manufacturer can provide and you support our hard working Australian staff. We source quality Australian made fabric.